Dongguan Precision CastingIn the process of production, because the transition zone standard is small, it will make its mechanical properties good. Dongguan precision casting can be useful to a certain extent to satisfy its fluidity and crystals that do not constitute bright light. The general temperature is 715 ~740°C.

The crack tendency of the round ingot of Dongguan precision castings is relatively low, so it can be useful to a certain extent to ensure that its alloy has its outstanding exhaust gas feeding ability, and it can be useful to find its sequence close to the conditions during use. It can be useful to improve its density, and its casting temperature is generally higher.

The production temperature of Dongguan precision castings can be useful to a certain extent to ensure that the melt will have good fluidity during the transfer process. The equipment needs to be useful in the process of selecting its casting temperature according to the transfer distance and Some reasons such as the temperature drop during the transfer process have always been usefully acknowledged.

Dongguan Precision CastingThe application temperature is useful to ensure that the melt will have good fluidity during the transfer process. The selection of the fine casting temperature should be based on the transfer distance, the cooling condition during the transfer process, alloy, standard, flow and other factors have always been recognized.

The mechanical properties of Dongguan precision casting are higher than those of cast iron in the process of use. However, the performance of cast iron will be worse for such materials. The melting point of Dongguan precision casting is relative to other materials during the production process. It's higher.

Dongguan Precision CastingThe main defect that appears on the surface of the production is pitting. If such a phenomenon occurs in the Dongguan precision casting product, it can only be scrapped in the process of use, which will result in an improvement in our production cost, which is not conducive to the resources of the product. Of savings.