Dongguan Precision CastingPoints not to be ignored:

1.When pressing wax molds, you must first perform inspections. After confirming that there is no problem, you can start actual operations and press wax molds.

The main parameters can not be suppressed by changing randomly during the process.

2.The mold cavity does not need to spray too much parting agent, it needs to be evenly proportioned, and when necessary, the parting agent can be blown evenly with the aid of compressed air nozzles.

3.When applying a new mold, try to figure out the mold assembly, disassembly sequence, and wax mold removal method as much as possible.

4.Put the wax molds in the storage tray. They should be protected from each other to prevent damage. Pay attention to the storage position to avoid deformation. If necessary, you can use a retainer to prevent the wax mold from deforming.

5.For pipe and valve wax molds, half or more of the wax molds should be placed in the storage tray separately as required.

6.Fill in the wax model identification plate properly, including the operator's name, wax model name, pressing time, product quantity, etc., and can't write in random.

7.Put the wax in the wax tank before the end of use, drain the residual wax, and put the waste wax mold and waste wax into the waste wax box(bucket)In, immediately send the wax treatment process flow.

8.When the wax press is working, do not hold the mold with bare hands or reach under the closing table, and do not press the button in one-hand mode to avoid safety accidents.

9.It is strictly forbidden to use wax pressing machine to press other objects,To avoid equipment damage and personal safety accidents.

10.Dongguan Precision CastingofFireworks are prohibited in the production workshop.